工廠化配管焊口

❶ 供熱專用保溫鋼管多少錢

預制直埋式高，低保溫管，保溫管件，200MW，300MW.600mw電廠主蒸汽，主給水，在熱熱段，冷段高壓管件，高內壓電容站彎管，工廠化配管所有產品均採用美國標准ASME（ANSI）、德國標准DIN、日本標准JIS、中國GB/T、JB、SH、HG等標准生產，公司產品，品種齊全，規格多樣，外形美觀，性能穩定，不僅有各種材質的對焊無縫彎頭，也可按用戶的要求加工製造非標產品。產品面向國內遠銷歐美及東南亞國家和的區，產品品質優良，質量可靠，深受廣大客戶和同行們的一致好評

供熱專用保溫鋼管聚氨酯發泡保溫管泡沫具有良好的機械性能和絕熱聚氨酯保溫管應用：聚氨酯保溫管用於室內外各種管道，集中供熱管道，中央空調管道、化工、等工業管道的保溫、保冷工程。概述 聚氨酯發泡保溫管自三十年代聚氨酯合成材料誕生以來，一直作為一種優良的絕熱保溫材料而得到迅速發展，其應用范圍也越來越廣泛，更由於其施工簡便、節能防腐效果顯著而被大量地用於各種供熱、製冷、輸油、輸汽等各種管道。大量地用於各種供熱、製冷、輸油、輸汽等各種管道。

❷ 誰能幫我用英語翻譯一下以下管件生產過程啊，很多專業描述我不會翻譯，非常著急謝謝啦！翻譯器勿擾

2, proct retroactive control.

We according to GB/t19001-2008 idtISO-9001:2008 standard model and the relevant state laws and regulations and standard, combined with my company confined pieces of the manufacturing and instrial piping proction, establish and maintain a documented quality assurance system to ensure the quality of proct manufacturing process control effectively. According to "proct identification and traceability control proceres" the strict proction process in each of the inspection and test for the user to provide high quality procts. We used in this contract testing equipment have complete quality certificate, inspection records and test report for the purpose of main inspection, testing equipment and proction equipment, including raw materials and procts inspection and test equipment, such as pipe proction equipment, inspection and test project by the company completed all proction processes, all of the company completed.

3, proct hot forming process and heat treatment process temperature control.

3.1 hot forming process control

(1) pieces of the hot forming technology process is important, the process of the blank heating can use electric heating heat. In the blank before heat with hammer, grinding wheel etc tool clear of surface crumbs Angle of billet, oil, rust and copper, aluminum and other low melting point metal. The blank check whether the label of the comply with the design requirements. In order to avoid materials in heating appeared in the process of carburizing phenomenon and affect the overall performance of the pipe fittings, heating the most appropriate USES electric furnace heating.

(2) cleaning heating furnace chamber sundry, check the heating furnace circuit, oil, car and temperature measuring system is normal; Oil is enough, circuit are in good condition; The heating furnace only allow placed a kind of material and wall thickness is no more than 20% of the stock.

(3) will be put in furnace of blank heat, application of refractory bricks to make the work in furnace and furnace table 20 mm isolation, according to different materials to strictly control the heating speed is not more than 220 ℃ / hour, heated to a material above 30 to 50 ℃ AC3 for thermal insulation, heat preservation time according to the thickness of materials, different determine that the ingredients are heat through, mean temperature. Adopted thermocouple temperature control. Then suppressed, ensure that eventually pressure is greater than 850 ℃ temperature. Heating and heat preservation process ensure is heated evenly, won't appear the local, burning or overheating. Suppression (push system) adopting infrared highlighted.it pressing temperature control.

(4) when heated to a blank specified temperature out after suppressed, in order to rece the heating time and suppression of fittings number, large diameter thick-walled tube must use the repression of press and fitting tire complete for alloy material, mould pressing in infrared measuring work-piece highlighted.it beginning of pressure temperature, pressure, temperature end when the workpiece a pressing short of asks and temperature is too low will work to heating and heat preservation re-blows more repression.

(5) the proct thermoforming full consideration to the finished proct forming process of thermoplastic deformation metal flow, molding mould tried to rule in the hot working deformation of the small resistance, the suppression of tire mould are on good condition, and according to the ISO9001 quality system requirements on a regular basis, control of the womb mould validation of thermoplastic materials deformation and the fitting of any point to the actual wall thickness accord with relevant standards of wall thickness.

(6) processing after molding the pipe pieces according to user requirements standard pipe size semi-finished procts cut appearance

3.2 heat treatment process control

First, and then to heat treatment process evaluation pipe heat treatment. According to the pieces of the material, make corresponding heat treatment process. (1) heat treatment before operation to prepare

A, and use of the equipment to be good, equipment installation and debugging on instrument to at expiration, equipment to be good grounding.

B, electronic potential difference meter, thermocouple intact, and no damage to the effective period.

C, ready to output leather line, compensation conctor, heating device, check and ensure its intact.

D, familiar with heat treatment process, and check the heat treatment to intervene pieces and the Numbers, specifications.

(2) heat treatment process

A, fittings, in strict accordance with the semi-finished procts for the provisions of the relevant standards of heat treatment system for heat treatment.

B, heat treatment before heat treatment furnace hearth that clean, no oil furnace, grey, rust and and material handling various other metals.

C and by all the pipe by heat treatment should be one of the hardness testing, and provide corresponding hardness report.

D, workpiece is put inside the furnace, all located want even effective heating area, and the smallest interval is not less than 200 mm.

E, heating equipment for 4 m * 6 m * 2.5 m oil burner. Each furnace are should be placed with furnace specimens.

F, ready to work: carefully check equipment, wires, thermocouple, confirm equipment, reliable connect normal, and then after boot.

G, temperature difference control: every time should strive to each pipe furnace inside and outside wall temperature even, constant in heating range of temperature difference between any two points should be less than 50 ℃.

❸ 鄭州萬達管件製造有限公司的生產能力

在總面復積逾20000平方米的專業制化加工車間內配有大、中、小型號齊全的中頻液壓彎管機組、中頻液壓彎頭機組，2000噸壓力機、大型熱處理爐、大型焊接設備等專業設備，500多套管件成型模具，可製造不同管徑、不同半徑、不同壁厚、不同材質的彎管和管件；擁有全套先進的坡口加工、配管鑽孔、管道切割焊接、法蘭金加工、噴砂除銹、熱處理和質量檢測等設備。彎管、工廠化配管、彎頭、三通、大小頭、高、中、低壓法蘭年加工能力達近2萬噸。公司產品的轉換設計全部採用計算機CAD輔助設計。我公司具有職工人數226人，技術員30人。公司管道工廠化生產規模、技術裝備、工藝水平、生產經營管理方面力爭處於國內領先地位。

❹ 滄州凱順源管道裝備製造有限公司怎麼樣

簡介：鹽山縣凱順源管件有限公司是於河北省鹽山縣，專業從事金屬管道和管道配件產品的研發、設計、生產及銷售，是國內高鋼級、耐高壓、大口徑高端管道管件類產品的專業生產商和供應商。創建於2010年的凱順源一直致力於管道和管件的技術研究和開發，具有多年的生產管理經驗，先後獲得ISO9001：2000國際質量管理體系認證，中華人民共和國特種設備許可證（壓力管道）等多項國際國內權威認證，是國家電力公司供應網路成員（60萬及以下機組），是中國化工裝備總公司、中石化、中石油定點生產企業，並與國內多家大型國有企業建立了長期供需合作關系，為多項國家重點工程提供了產品。經過十幾年的迅猛發展，公司不斷壯大，已成為國內管道裝備製造業的骨幹企業。       公司北依京津，東臨渤海黃驊港，地處「京津冀」都市圈，坐落於國家「環渤海經濟區開放縣」，「中國管道裝備製造基地」中國河北鹽山，地理位置相當優越，交通極為便利。公司總佔地面積107500平方米，現有資產5800萬元，其中固定資產1700萬元，擁有員工320人，其中工程師35名，管理人員28人，各類專業技術人員98人。      公司生產的主要產品：鋼制高壓管件、中低壓管件、襯塑防腐管件、保溫管件、耐磨管件、工廠化管道配管。可為用戶提供各種規格型號的碳鋼，合金鋼，不銹鋼彎頭、三通、四通、異徑管、法蘭、管帽、封頭、管道支吊架、接管座、支管台、波紋補償器、管道配件、煙風煤粉管道及配件等；提供不同材質不同規格型號的雙面埋弧焊螺旋管鋼、無縫鋼管、直縫高頻焊鋼管、冷拔熱擴鋼管、防腐鋼管、保溫鋼管等系列管道產品。產品廣泛用於石油、電力、化工、制葯、天然氣、供熱、造船、冶金、鍋爐、橋梁、污水處理、城建等諸多行業。產品行銷國內29個省市自治區，並部分出口美國、沙特、委內瑞拉、印度、泰國、巴基斯坦、孟加拉、敘利亞、伊朗、等國家和地區。     公司具有雄厚的生產加工能力和先進的檢測手段，完善的質量管理體系，保證產品的輸出質量，滿足用戶需求。有生產高中低壓管件的生產設備130餘台,包括可煨制φ1520的中頻感應加熱彎管機、可推制P91、P22高壓無縫彎頭大型推制機、不銹鋼彎頭推制機、3000噸液壓機、360立方米大型天然氣熱處理爐等；有國際先進的雙面自動埋弧生產線4條，高頻焊鋼管生產線1條，管道專業防腐保溫生產線1條。公司檢測功能齊全，檢測設備儀器均居國際、國內先進水平，有X光探傷、磁粉探傷、超聲波探傷、金相分析、化學試驗、機械性能試驗、沖擊試驗、 水壓試驗、光譜試驗、紅外線監控等檢測項目。      近年來，我公司先後為華能淮陰電廠（2*300MW）、連雲港電廠（2*300MW）、准格爾電廠（2*300MW）、長春二熱（2*200MW）、通遼電廠（1*600MW）、雙鴨山電廠（2*600MW）、華能巢湖電廠（2*600MW）、華能巢湖電廠（2*600MW）、華電鐵嶺電廠（2*600MW）、華能泌北電廠（2*600MW）、元寶山電廠（1*600MW）、白山熱電廠（2*300MW）、鴻駿鋁電（2*135MW）、神化煤制油有限公司、錦化化工集團、烏海化工有限公司、滄州大化集團、天津鐵廠、本溪鋼廠、邯鄲鋼廠、大同自來水有限責任公司、陽泉煤業集團等國家大型企業、重點工程大批供貨，由於供貨及時，質量可靠，受到了各用戶單位的一致好評。      公司宗旨是：以質量求生存，靠信譽求發展，誠信為本，創新為先，以質取勝。      鹽山縣凱順源管件有限公司將以優良的產品，良好的服務，熱誠期待國內外同仁的光臨洽商，我們願與你竭誠合作，共謀發展，互利雙贏。
法定代表人：郭策
成立時間：2015-02-04
注冊資本：1000萬人民幣
工商注冊號：130925000027163
企業類型：有限責任公司(自然人投資或控股)
公司地址：鹽山縣鹽塔路劉紅廟段

❺ 你說的」埋地鋼管如果採用鍍鋅管不需要做兩布三油！

有規范要求要用三油兩布嗎？ 埋地鋼管如果採用鍍鋅管不需要做兩布三油！兩布三油是針對焊接鋼管埋地的防腐處理。 沒有鍍鋅本身就是為了防腐

❻ 焊接接頭的性能主要取決於哪些方面

焊接接頭的性能主要取決於:
1、材料本身的焊接性能，例高碳鋼本身焊接性能就差，不論版如果保護採用何權種焊接都不會有滿意的效果。
2、焊接的方式和採用的焊料，相應的材料應該有相應的焊條。例如用氬弧焊要比一般焊法要好。
3、焊後是否進行處理。例有些重要件就要求焊後去應力退火

❼ 江蘇華軒管道設備有限公司怎麼樣

簡介：江蘇華軒管道設抄備有限公司成立於2009年,總部位於江蘇南京，是一家管道設備公司。江蘇華軒管道設備有限公司專業銷售各種材質鋼材，無縫鋼管，直縫鋼管，鍍鋅鋼管，螺旋鋼管，閥門，管件，彎頭，四通，彎管，管帽，異徑管，三通，盲法蘭，平焊法蘭，對焊法蘭，工廠化配管，鍍鋅管件，鍛制管件，金屬軟管，橡膠軟接頭，螺栓，墊片等壓力管道設備。
法定代表人：趙振侖
成立時間：2014-03-26
注冊資本：2188萬人民幣
工商注冊號：320123000286086
企業類型：有限責任公司
公司地址：南京市六合區方新路1號金盛建材傢具城B18廳1F區39-40號