导航:首页 > 方管焊管 > 方管的英文缩写

方管的英文缩写

发布时间:2021-02-07 10:50:07

钢材中201,202,204,301,304等是指的什么呢

都是不锈钢的型号,沉淀硬化型不锈钢:

1、201、202、204同属于200系列(铬-锰-镍)。

2、301和304都属于300系列:铬-镍 奥氏体不锈钢。

301:延展性好,用于成型产品。也可通过机械加工使其迅速硬化。焊接性好。抗磨性和疲劳强度优于304不锈钢。

304:通用型号;即18/8不锈钢。产品如:耐蚀容器、餐具、家俱、栏杆、医疗器材。标准成分是 18 % 铬加 8 % 镍。为无磁性、无法借由热处理方法来改变其金相组织结构的不锈钢。

(1)方管的英文缩写扩展阅读:

不锈钢常按组织状态分为:马氏体钢、铁素体钢、奥氏体钢、奥氏体-铁素体(双相)不锈钢及沉淀硬化不锈钢等。另外,可按成分分为:铬不锈钢、铬镍不锈钢和铬锰氮不锈钢等。还有用于压力容器用的专用不锈钢《GB24511_2009_承压设备用不锈钢钢板及钢带》。

不锈钢的耐蚀性随含碳量的增加而降低,因此,大多数不锈钢的含碳量均较低,最大不超过1.2%,有些钢的ωc(含碳量)甚至低于0.03%(如00Cr12)。不锈钢中的主要合金元素是Cr(铬),只有当Cr含量达到一定值时,钢材有耐蚀性。

不锈钢一般Cr(铬)含量至少为10.5%。不锈钢中还含有Ni、Ti、Mn、N、Nb、Mo、Si、Cu等元素。

❷ 200*200*8*8是方管还是H钢

这个尺寸呐是h型钢 两百是它的高 成吧是它的厚度 两百乘两百是它的长乘以宽

❸ 电视机英文全称怎么写

television

英 [ˈtelɪvɪʒn] 美 [ˈtelɪvɪʒn]

n.电视机;电视节目;电视;电视系统;电视学;电视广播业

复数: televisions

用法:

1、电视机

a colour television

彩色电视机

a widescreen television

宽屏幕电视机

2、电视节目;电视

We don't do much in the evenings except watch television .

我们在晚上除了看电视不怎么干别的事。

3、电视系统;电视学;电视广播业

satellite/terrestrial/cable/digital television

卫星 / 地面 / 有线 / 数字电视系统

the television news

电视新闻

a television company/presenter

电视广播公司 / 节目主持人

I'd like to work in television (= for a television company) .

我希望从事电视广播事业。

(3)方管的英文缩写扩展阅读:

television形近词

telecast

英 [ˈtelikɑːst] 美 [ˈtelikæst]

n.电视广播;电视节目

v.电视广播

第三人称单数: telecasts 复数: telecasts 现在分词: telecasting 过去式: telecasted 过去分词: telecasted

派生词: telecast v. telecaster n.

用法:

(especiallyNAmE)电视广播;电视节目

【派生词】telecastverb

【不规则形式】telecast, telecast

The event will be telecast simultaneously to nearly 150 cities.

这一盛事将向近150个城市同时进行电视广播。

❹ 60x80的方管,英文怎样说

The day that you see me old

❺ 方管焊管机用英语怎么说

方管焊管机的英文翻译_网络翻译
方管焊管机
Square pipe welding machine
全部释义和例句试试人工翻译

❻ 方钢, 扁钢, 方管等用英语怎么写

方钢 square steel
扁钢 flat-rolled steel
方管 square tube

❼ 75*45不锈钢方管 t=5什么意思

这里的T是代表方管壁厚,完整的英文单词是:thickness

❽ 帮忙翻译成英文

4, device structure shows
a, the system consists of 10 processing station, three sets of heating devices, emission devices, and manual and automatic temperature control, electronically controlled automatic spray composed of co-washing machine.
b, unit structure of the chamber body, tank, pumps, valves, piping, nozzles, insulation and ventilation system, etc..
c, room spray body design is divided into paragraphs and transition, with anti-series between the Dan liquid baffle, similar processes with the adjacent water washing up against the technology, from the washing process ensures the effectiveness and save water. Spray pre-treatment units to eliminate entire run, run, drop, leakage and so on.
d, spray chamber body through all the pre-treatment station, the entire room with 1.2mm stainless steel proction body. The frame is square tube proction, heat insulation structure section are used, insulation board is 0.8mm stainless steel jacket.
e, tank 3.0mm thick stainless steel plate. All tanks are heating section heat treatment, insulation thickness 50mm, high quality rock wool insulation panels, insulation layer 0.8mm stainless steel jacket.
f, Liquid Tank main body design, the Deputy slot structure and cover in the slot and the slot located between the water seal device, set the upper sump overflow ports and water supply port, bottom tilt and stainless steel with double-layer filter, to prevent debris into the pump. The lowest position in the tank equipped with a discharge valve.
g, the nozzle using the new nozzle, which is characterized by the direction adjustable, quick loading and unloading, the material is PP, which uses a spiral spray-type phosphate special nozzles, with the impact of small, uniform coating, and the remaining processes are used in paragraph SUPER VPZ cleaning nozzle.
h, with inspection door and check the repair platform, escalator, convenience checks and maintenance.
i, temperature control system, using a manual temperature control and automatic control and automatic heating, heating equipment, the normal time of 1.5 hours to process temperature.
j, heating system: the steam solenoid valves, heaters, valves and piping and other components.
Degreasing bath heated corrugated plate heat exchangers are used directly to heat the steam. Phosphating Bath tank heating with indirect steam heating plate heat exchanger, or steam through the plate heat exchanger to heat the water heating tank, then water as a heat carrier through the heat exchanger of the phosphate groove of Bath heating, indirect heating method particularly suitable for heating phosphate bath, which can heat the temperature control bath below 45 ℃, avoid direct steam heating, the bath temperature by the heat exchanger surface, the impact of changes in chemical properties and effective concentration.
All heating tank bath temperature control are used temperature sensor, digital temperature controller, automatic control valve to change the steam heat exchanger and heat exchange capacity can be realized.
k, the top exports and imports both rooms lead to outdoor ventilation system to spill water vapor, while the subsequent removal of blowing steam phosphating solution, ensure that the jobs in the rust before phosphating, the top of the catenary in the room to run open body Department has a hanging chain guard.
l, phosphate slag method using phosphate dark tower, trough concentration, reciprocating pumps etc., Phosphating Phosphating precipitation through the pump hit the tower, the phosphating solution in the phosphate precipitation in the tangent direction to the tower, the upper clear solution phosphating tank overflow back, slide into the bottom of lower phosphate slag, and condensed regular discharge slot in the pipeline with compressed air device (used to clean blocked pipes phosphate resie), located sedimentation tower for the phosphate reserve tank This slot should be slightly larger than the phosphate groove.
m, units are used pipe water pump vertical pump, intake pipe, with discharge valve, other valves with butterfly valves.
n, all the pumps are all made of domestic brand-name manufacturers, all of the infusion tube of stainless steel connections, spray up and down the same pressure to achieve the best cleaning results.

❾ 钢结构建筑图中SHS 表示什么

一、“SHS”在钢结构中通常表示“断面为正方形的方管”,是英文“square hollow section”的缩写。
二、此外内,在钢结构中我们还会遇到如容下两个较常见的缩写符号:
1、“CHS”指的是“园管”,是英文“circular hollow section”的缩写;
2、“RHS”指的是“断面为长方形的方管”,是英文“rectangular hollow section”的缩写。

❿ 钢结构建筑中Trubolt 中文是什么意思

一、来“SHS”在钢结构源中通常表示“断面为正方形的方管”,是英文“square hollow section”的缩写。
二、此外,在钢结构中我们还会遇到如下两个较常见的缩写符号:
1、“CHS”指的是“园管”,是英文“circular hollow section”的缩写;
2、“RHS”指的是“断面为长方形的方管”,是英文“rectangular hollow section”的缩写。

阅读全文

与方管的英文缩写相关的资料

热点内容
不锈钢锅怎么画 浏览:927
无缝管直径多少厘米 浏览:878
脚气取钢板要多久能恢复 浏览:124
不锈钢管怎么弄弯 浏览:51
工程预算中钢筋损耗如何 浏览:694
郑州哪里有加工不锈钢 浏览:647
钢铁侠1票房多少 浏览:371
不锈钢和石膏板哪个好 浏览:188
pc料的模具用什么钢材 浏览:596
500一600对应什么钢材 浏览:484
焊管设备图 浏览:300
蛋鸡钢管顶高和肩高个是多少 浏览:213
8钢板是什么意思 浏览:114
钢材的成本率一般是多少 浏览:663
高光模具用什么钢材 浏览:323
200200镀锌方管 浏览:715
sc15钢管内径是多少 浏览:251
管道钢管焊接用什么焊条 浏览:797
什么是平法钢筋算量 浏览:385
哪里有卖磨床模具 浏览:111