不銹鋼BA面指的是什麼

A. 不銹鋼BA處理是什麼意思

不銹鋼BA處理抄是：BA（Bright Annealing）, 光亮退火處理，指不銹鋼冷軋板經光亮退火處理，再經平整後的一種表面狀態。

一、304不銹鋼帶鋼BA處理後：

B. 不銹鋼BA面是指什麼呢

詳細的情況也不好怎麼回答的，不過建議你去一下，中國鋼鍬交易網看看，上面有很詳細的關於不銹鋼方面的介紹。很適合你這種情況。

C. 什麼是不銹鋼板2B面不銹鋼板2B面 和BA面

不銹鋼2B面板就像水泥地面那種顏色，BA面板是亮面的，可照見人影的

D. 不銹鋼食品管BA表面是什麼意思

不銹鋼BA管――BrightAnnealedtube(真空光亮退火管),它是氣氛保護熱處理(BrightAnnealed)的簡稱,又叫:不銹鋼BA管,潔凈管,光亮退火管,無縫管. BA表面的定義來自於美國標准ASTM A480 和歐盟標准EN10088。見下列英文解釋。

The most common definitions of these surface finishes are provided by ASTM A480 and EN 10088. In both cases it is the cold rolled manufacturing method that is specified rather than specific, measurable characteristics about the surface. We have used ASTM A480 as an example:

ASTM A480:

No. 2D - A smooth, non-reflective cold-rolled annealed and pickled or descaled finish. This non-directional finish is favourable for the retention of lubricants in deep drawing applications.

No. 2B - A smooth, moderately reflective cold-rolled annealed and pickled or descaled finish typically proced by imparting a final light cold-rolled pass using [large diameter] polished rolls. This general-purpose finish is more readily polished than No 1 or 2D finishes. Proct with 2B finish is normally supplied in the annealed plus lightly cold-rolled condition unless a tensile-rolled [harder and stronger] proct is specified.

Bright Annealed [BA] Finish- A smooth, bright, reflective finish typically proced by cold rolling followed by annealing in a protective atmosphere so as to prevent oxidation and scaling ring annealing.

2B

2B is the most widely used stainless steel surface finish. It is especially common in instrial, chemical and food processing applications such as process vessels and tanks. It is also used in some architectural applications that will not be closely examined for uniformity of finish such as downpipes and gutters.

When specifying this finish think about these attributes:

• 2B is the most economical finish

• It is highly corrosion resistant because it has been chemically pickled and is smooth

• Over broad areas and between batches etc., it is not uniform and may not match in appearance

• It has been proced in the mill and can't be matched after fabrication

• It if often protected by plastic films until final cleanup and commissioning

2D

2D is used around the world in applications where its low reflectivity is important. The largest application is in roofing materials. The surface is rougher than 2B and retains lubricants better making it appealing for deep drawring. 2D surfaces are not designed for appearance so the limitations on matching of weld and other surface damage is not as critical. Railcars are a typical example where thicker sheet and ongoing abrasive damage make the rougher 2D a suitable finish.

When specifying this finish think about these attributes:

• 2D is not commonly available in Australia

• It is highly corrosion resistant because it has been chemically pickled and is relatively smooth

• Over broad areas and between batches etc., it is not uniform and may not match

• It has been proced in the mill and can't be matched after fabrication。

  Bright Annealed (BA)

The classic use of a BA finish is domestic: the interior of a dishwasher or clothes washing machine. In the clothes washer, it also provides a smooth, non-abrasive surface for the clothes to slide around. The mirror like surface is also used in road mirrors where a precise image is not required.

When specifying this finish think about these attributes:

• BA is common in some grades and thicknesses, but not all

• It is highly corrosion resistant because it is very smooth

• Different batches may not match

• It is has been proced in the mill and can't be exactly matched after fabrication although a mechanical mirror polish can be close.

E. 什麼是不銹鋼板2B面不銹鋼板2B面和BA面是啥意思

2B（霧面）：冷軋後經熱處理、酸洗，再以精軋加工使表面為適度之光亮者。由於表版面光滑，易於權再研磨，使表面更加光亮，用途廣泛，如餐具、建材等。採用改善機械性能的表面處理後，幾乎滿足所有用途。
BA （亮面）：經冷軋後施以光亮退火，並經過平整得到的產品。表面光澤度極好，有很高的反射率。如同鏡面的表面。用於家電產品、鏡子、廚房設備、裝飾材料等。

F. 不銹鋼亮面板是不是BA板，有什麼區別

不銹鋼BA處理是：BA（Bright Annealing）, 光亮退火處理，指不銹鋼冷軋板經光亮退火處理，再經平整後的一種表面狀態。
亮面是指不銹鋼很亮，常內見鏡面光澤度不容銹鋼分為6K、8K、10K這三種。亮面也就沒有指具體，相對來說要求比較低的，也就是說明只要有亮度就可以了，泛指6K。
鏡面是指不銹鋼的表面狀態。鏡面在不銹鋼在行業中屬於8K表面。
雙鏡面不銹鋼顧名思義就是兩面都是不銹鋼鏡面。雙面不銹鋼比單面不銹鋼難度要高很多。
常見鏡面不銹鋼分為6K、8K、10K這三種。一般是普通拋光，普通8K，精磨8K，超強精磨10K效果。相同厚度的一般無太大差別，10K鏡面更亮；厚度越厚，效果越差，加工費用也越高。目前最為高端的鏡面效果也就是手磨12K以上效果。

G. 不銹鋼的2B 、BA是什麼意思

L4不銹鋼是廣州聯眾的產品，相當於國標202不銹鋼。

2B是指不銹鋼的表面，回代表霧面，也叫2B霧面，照不出人影的。答2B面的不銹鋼都是軟態的，也就是硬度HV（維氏硬度）在150-200度。依次排序為2B面，啞光面，光亮面，BA面，6K，8K。BA以後就屬於鏡面了（包括BA）。

H. 不銹鋼材料430BA中的BA是什麼意思參考哪個標准

430是不銹鋼的型號,此型號中硫,磷,的含量(對不銹鋼鋼質量有不利影響)比較低.參見版http://www.bluesz.com/blue/article1/made/200701/864.html

BAfinish 是指BA面層權的不銹鋼,面層有2B和BA的區別,冷扎--退火酸洗--平整 2B
冷扎--光亮退火--平整 BA
主要區別在於退火，2B是退火、酸洗，表面有一定程度氧化，較暗；BA光亮退火，表面不氧化，較亮。

I. 不銹鋼BA表面是什麼樣的，與2B比較，外觀、工藝和用途上有什麼不同

BA表面 外觀上比較亮 類似鏡面效果

304 的BA 2B表面區別很大 430的區別小一些
工藝的話 BA走的是專光亮退火線
用途上區屬別不大 主要看產品要求美觀就用BA
以前洗衣機都用BA 現在都改2B了

J. 430不銹鋼板BA面與2B面怎麼區分

BA和2B指的是板面亮度的等級